We know that renovations are always better in the hands of professionals and experts. But the truth is that we can save the domestic economy quite a bit by making small changes to the home ourselves.

Wall and floor coverings are a widely used technique.

Whether it’s because we’re bored with the colors of our walls and floors. Or just because we want to create a room in the house? Today we will explain it to you in a simple way. How to install vinyl flooring and walls. Grab a piece of paper and a pen and write it down. This technique is very advanced.

What is vinyl siding?

Vinyl siding is a booming technique, its success is due to the quality of the material and the ease of use of this technique. This type of covering material is used on both floors and walls. Recommended for installation in areas with high humidity. This is because the material is prepared to prevent water and/or heat from passing through. These are tiles whose installation does not require any work, therefore, with some patience and skill. Within a day or two all the work will be completed. The cost is already low.

This coating is used in more northern cities.

This type of coating is often used in northern cities. This is due to the moisture-proof properties that are created. Still not convinced by this coating? We bring you another advantage and that is with this type of cladding. They can also isolate noise. And what’s even better? Because it is made from innovative materials. Therefore does not require too much maintenance, which makes The best choice if there are children at home.

There are many textures and colors. Can be used in both bathroom and kitchen. or balcony. Slabs of this type are easy to find in specialized DIY or bricklaying centers. And the price is not very high. Vinyl is the clear winner in decorating this year.

How to make a vinyl record?

With a modern look and as we highlighted earlier. Ease of installation Making a vinyl wrap takes no more than a morning of work.

Metal and vinyl siding bring innovation to our homes.

Although the layout is very simple. But we recommend that you Cut the tiles for which you purchased the covering material. or in an establishment that specializes in bricklaying The cost will be lower if you have to purchase the necessary cutting machine and tools.

What material is required for cladding?

The important thing is that vinyl tiles stick to both the wall and floor. Special vinyl glue Sealing primer And if the tile doesn’t have glue Buy special vinyl glue..

The first thing you need to do is remove all furniture and objects in the room to facilitate assembly. The second step will be Apply sealing primer. On the floor and when it’s dry, we’ll apply it on the walls as well. It usually takes a few hours to dry. Of course, it’s best to leave it on for three hours.

to cover your home You must remove all furniture.

We will start with the floor by placing the first tile in the corner and gradually filling in the middle. It is important that the first tile, which is the female part, is flush with the wall. It is recommended for ground Before this, use special glue for vinyl.This way we can be sure that the slab will not move and remain completely attached to the underlayment. It is important that the vinyl pieces on the floor are not horizontally aligned, that is, they are not placed on the same line, which makes them more stable. When the floor is ready We will let the vinyl glue act and dry. And we will continue coating the walls.

We can install different types of vinyl panels on walls, providing a superior and beautiful lighting effect. It looks like it was done by a professional. As we said There are many different textures and finishes available. Therefore, it is recommended to lay tiles of the same type on the floor so that the room does not have too much weight on the walls. We can play with the contrasts and see which combination is the best.

Vinyl siding comes in many pieces.

For the walls, we’ll start from the bottom up. We will first place vinyl glue if the tile we purchase does not come with it. We will attach the tiles using special glue. Just like on the ground It is recommended that the floor slabs do not follow the same lines.. Once we have installed the floor slab. It is important that we fix the entire slab using a slab that has some weight on it. and wait until it is properly fixed and dry.

Our rooms will eventually be transformed to achieve a ceramic or stone effect on a budget. And you don’t have to invest a lot of money in tools. and bricklaying equipment