How to draw with charcoal – Pk serfing

charcoal is one of Older techniques In the art world, Neanderthals already used charcoal to paint cave walls. Since then The use of charcoal also stems from cave art. For many years it disappeared and was no longer used by artists until it was rediscovered during the Renaissance.

It was used as a preparatory or linear drawing. Gradually, it was put into commercial use. And today there is much more than that. easy to get. Sold in sticks and even pencils. But in the past, the painter prepared the charcoal himself.

Currently, charcoal sticks are one of The most necessary materials in the world of painting It’s an easy element to use as long as you work with extreme caution. They will come apart with little effort. It is used by gently rubbing the paper. Question of patience and increase flexibility to achieve the perfect charcoal drawing.

Using charcoal correctly

When working with this technique it is necessary to adhere to set of guidelinesEspecially if this is the first drawing with this content, that is, it is recommended to follow certain instructions or steps:

• Trace the drawing with medium or large charcoal.. After that it will be much easier to mix. When you make a mistake All you have to do is dab on the cloth and paint.
• Don’t drag the line with force.. Avoid pressing the charcoal until the drawing is complete.
• Take the charcoal to the side.. This method will make the area with charcoal spots larger.
• For dark areas that are too large Use black powder paint. (Scrape off the charcoal a little) then use a sponge to expand it. Be careful not to dirty the rest of the painting.
• for creating shadows You can blur the image with a small sponge. or even your own fingers Although the most accurate option is blurDon’t forget to do it gently. Then review the outline of the drawing.
• You must Edit drawing in steps. This will prevent used carbon from falling out. and take advantage of it to make certain parts of the paper darker.

Precautions

It is very important to have Be careful not to grease the paper. that we are working on It is very common for this to occur without realizing it using your finger or a simple rubber band. which causes stains that cannot be removed or concealed for Avoid scratching the painting. Use charcoal to make sure there are no knots and if there are any, don’t forget to scrub. Pay attention to your hands. It was once stained just like the arm because the painting might have accidentally gotten dirty. Use a binder. In the final stage of drawing You will need to stick the charcoal onto the paper and protect your drawing. examine A few minutes later with your fingertips gently. without releasing any more carbon Do not edit or edit. Drawing once the fixative has been applied

Steps for drawing with charcoal

Choose the right material

• choose Various hard and soft charcoalThe hard part is used to create a brighter, cleaner edge. While the softer part is used to blend better and create deeper lines.
• You can choose between paper White paper, carbon paper, or colored paperIt depends on the texture you want your drawing to have.
• You have to buy one. Moldable rubber, blurry images, and white chalkMoldable erasers are the only ones that can completely erase chalk. Moreover, when used with blur and white chalk, It can also be used to create shadows and/or reflections in paintings.
• Always try to work with them. StandEspecially if you are a beginner and avoid drawing on a horizontal table.
• buy peg. This will cause the charcoal to not be damaged.

holding charcoal

• You have to take the charcoal. As if it were a pencilThis way you will get more sharpness at the edges. If you want to create clear lines and edges
• with side charcoal You’ll draw a wider line.
• Never mind. Your shoulders and elbows help control the rhythm.. is difficult But you will need to learn to draw with charcoal with your wrist away from the paper. Therefore, you will need to use your shoulders and elbows when drawing lines to provide more movement and avoid stains on your work.

make a drawing

• • Any drawing you are going to make will have geometric shapes. The easiest way to draw with charcoal is Capture geometric shapes and draw the most basic things Then move a little. It is vital that you leave all the details last and focus on the main person first.
  • You can use Compressed charcoal to add sharp edges to your drawing. After completing the main parts Review again The numbers add more realistic features. We recommend using moldable rubber to shape each object.
  • blur: To add shadow to charcoal as mentioned above. The best way is to use a blender. If you shade with a soft pencil You will get more realistic results.
  • with Moldable eraser You can create light and dark ranges.

.